Troubleshooting
Most commonly, this is because some other device has connected to the Control Module's wi-fi, or because the wi-fi signal between the two devices is wea...
Tue, 4 Jul, 2017 at 12:15 PM
Another device (such as a cell phone) may also be trying to connect to the Ditch Assist Control Module. Disable Wi-Fi on other devices
Make sure there’s...
Fri, 17 Feb, 2017 at 4:21 PM
Reverse the electrical connections to the valve
Fri, 17 Feb, 2017 at 4:22 PM
Turn of hydraulic flow to the valve.
On the Ditch Assist App tap and hold the UP and then DOWN manual controls for about 5 seconds each to equalise pres...
Fri, 17 Feb, 2017 at 4:22 PM
You probably forgot to hit stop, so automated control is still active and trying to keep you on-grade! Make sure you press STOP to disable the automation
Fri, 17 Feb, 2017 at 4:24 PM
Confirm valve is correctly connected to both implement raise/lower and tractor hydraulics
Confirm you have constant flow (detent) turned on for the circ...
Tue, 4 Jul, 2017 at 12:19 PM
Try turning up the hydraulic flow on the tractor to the valve
Be sure you have your hydraulics in detent (not in float)
Are you using our Closed Cent...
Fri, 17 Feb, 2017 at 4:25 PM
This is a GPS issue, not an issue with Ditch Assist. Make sure your GPS is mounted with a clear sky view. Ensure you aren’t too far from your base station i...
Fri, 17 Feb, 2017 at 4:26 PM