- Try turning up the hydraulic flow on the tractor to the valve
- Be sure you have your hydraulics in detent (not in float)
- Are you using our Closed Center valve on an open center tractor?
- If your GPS is outputting NMEA messages, ensure that GGA is being transmitted at 10Hz or 5Hz
- Experiment with the Min and Max valve DC settings to increase the valve sensitivity (see info under Settings Menu)
Implement Hydraulics seem Slow to Respond/Implement will lower but not raise Print
Modified on: Fri, 17 Feb, 2017 at 4:25 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.