Ditch Assist App Settings Menu

Settings: Accuracy Loss Warning
If checked, an audible “beep” will be continually emitted from your device if RTK or subscription-based correction accuracy is lost. This is designed to al...
Fri, 17 Feb, 2017 at 4:13 PM
Settings: Inches/Arrow
Specifies how many inches are represented by each arrow on the visual up/down guidance light bar. The value specified here also determines the tolerance th...
Fri, 17 Feb, 2017 at 4:13 PM
Settings: Nudge Sensitivity
Specifies how many inches the Current Target Elevation will be adjusted with each press of the Nudge Depth buttons.
Fri, 17 Feb, 2017 at 4:15 PM
Settings: Response Sensitivity (Raising) & (Lowering)
Allows tuning of the proportional valve response time and speed for manual control (i.e. when you press the manual raise/lower buttons). You may select a v...
Fri, 17 Feb, 2017 at 4:15 PM
Settings: Min and Max DC (Valve Duty Cycle)
Min Valve DC This is an advanced setting, and adjusts the duty cycle algorithm used to operate the valve in automated grading mode. The Min Valve DC settin...
Fri, 17 Feb, 2017 at 4:16 PM
Settings: Map Marker Offset Distance
This setting controls how often we drop a green or red marker on the map. The default is 10ft
Thu, 23 Feb, 2017 at 11:22 AM